MAGNETIC LINEAR ENCODER SCALES        
 





  MLS 1
• Non Contacting  Incremental System
• Very small measuring head ( metal enclosure)
• Wide range of available resolution up to 1 µm
 • Protection class IP67
 • Measuring lenghts  are up to 100 meter
 • Resistant to humidity
 • Wide mounting tolerances
 • Robust shielded aluminium
• Incremental outputs A, /A, B, /B and Z Reference signal (without or one reset signal by start, or every 5 mm)
 • Output signal Push-pull, TTL or RS422 line driver








                                         
 

  

MLS 2
MLS1 and PS2 Profile System
• Tape in flat aluminium profile
 • Wide range of available resolution up to 1 µm
 • Protection class IP67
 • Measuring lenghts  are up to 100 meter


 
 


 MLS 1 - 2 User Manuel









 

  

MLS 3

Sensor Head in slide carrier with sealed high aluminium profile

Sealed linear encoders are protected from dust, chips and splash fluids and are ideal for operation on machine tools. An aluminium housing and elastic sealing lips protect the magnetic tape, scanning carriage and guideway from chips, swarf, dirt and splashwater. The scanning carriage travels in a low-friction guide within the scale unit. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways.


New Version







   MLS 4

Self-Aligned System
MLS4  is designed for press brake and bending machine applications.
 
 • Double protection along the sliding side (four lip seals)
 • Self aligned
• With integrated guide
 • Large mounting tolerances
• Self-adjustment of the clearance between the guide and the carriage.
• Shielded and armoured power cable with a stainlesssteel braid.
• Functional-calibration hybrid circuit.
• Excellent stability of the signals
 • Positive or negative signals via Line-Driver outputs
 • Compressed air inlet inlets at the scale end blocks